To start with the wireless process first you need to make sure that the printer is turned on.



The next one is to press & maintain the wifi button at the top of the printer until the lamp flashes once for the process of canon pixma mg3022 setup wireless.



Well, now you will notice that your lamp next to this button begins to flash blue after which go to the access point and press the wps button within 2 mins.



After you are through with the above process now the blue wifi lamp at the printer will flash at the same time as searching, and the power and wifi network will also flash while connecting to the access point.



Now when the printer has correctly made a connection to your wi-fi network, the power and wifi light will stop flashing and continue to be lit.


To confirm if the printer is well connected with wifi we recommend running the print test if you are able to print then it means you are all done with the process of canon pixma mg3022 setup wireless.